Description:

Omega Fire™ is a ceramic-based, intumiscent, water-borne, fireproofing coating, that will give a 1 or 2 hour fire rating, depending on the thickness applied. Omega Fire™ is a unique blend of 8 different ceramic compounds (chosen during 6 - years research out of 1000 compounds) and intumiscent additives that combine and work together to form a heat block against extreme heat migration. Any surfaces covered by this coating is able to offer extreme heat insulation and resistance against direct fire.

Benefits:

  • As the only one fireproof coating it passed an ASTM E119 test with the result: 3 hours PLUS!
  • Unique among fireproofing coatings, as it is a hybrid material with 8 different ceramics and intumiscent additives.
  • Humidity and water-resistant.
  • Does not flake off like many conventional fireproofing materials.
  • Constant adhesion above 2000oF, stays intact.
  • Mould and mildew resistant.
  • Fights condensation on its surface.

Uses:

  • Tested for use directly on structural steel to give a one or two hour fire rating, depending on thickness applied.
  • As a fire protection for:
    * strategic places in military facilities
    * places where engine is places in military vehicles
    * slip machine rooms and ship kitchens
    * stairways, boiler rooms, walls and ceilings
  • Control over fire spread on ferrys and tankers with minimal damage of hull.
  • To prevent fire spread and collapse of frameworks, particularly as protection of I - joists and supporting pillars in high rise buildings.

Parameters:

  • Type: thermal ceramic insulator
  • Applied rate: cca 0,122 m2/1Liter/1hour
  • Dry time:4 hours to touch/recoat in 12 hours according to humidity and warmth in atmopshere
  • Fully cures: 21 days (cures by evaporation)
  • Film thickness: 2 - hour protection = 7.6 mm wet / 6.35 mm dry
    3 - hour protection = 12.7 mm wet / 10.16 mm dry
  • Weight: 1,35 kg / 1 liter
  • Vehicle type: water - based resin system of acrylic and silicone
  • Shelf life: 1 year+
  • VOC level: 76 grams /liter
  • Viscosity: 90,000 centipoise
  • UV resistant

Limitations:

  • Not suitable for underwater use of any kind.
  • Do not use as floor coating.
  • Do not used directly on food preparation surfaces.
  • Not to be used as an insulating material.
  • Omega Fire™ is grey in colour and rough in texture.
TOP