Moist Metal Grip is a two-part epoxy designed to provide a water resistant, anti-corrosion coating to wet and submerged surfaces. Moist Metal Grip is extremely flexible, tough, and durable.
- Prevents corrosion of coated materials from the damaging effects of submersion or constant moisture exposure.
- Applied to moist or condensating pipes or metal surfaces that cannot be dried or stopped to dry before applying a corrosion coating.
- Submergible after only 48 hours of cure time. Finishes curing while submerged.
- Displaces the moisture on the surface and the epoxies attach to the metal surface and cures chemically.
- Acid and chemical resistant.
- Smooth finish, self-levelling and can be tinted any colour desired.
- Can be applied to steel, aluminum, wood, and concrete.
- Apply to wet surfaces that cannot be dried before applying a corrosion coating.
- Use for all metal and concrete surfaces that are exposed to constant water pooling or condensation. If metal is to be submerged, use Moist Metal Grip to protect it while under water.
- Can be used to protect inside of water tanks. Moist Metal Grip is a polyamide formula base that is safe for potable water uses.
- Can be applied over metal or concrete surfaces that are also flooring. Moist Metal Grip is tough enough to withstand traffic.
- Type: aminoepoxy resin
- Applied rate: cca 6 sq.m. / 1 l (metal)
cca 5 m2/ 1 l (concrete) - Dry time: 8 hours to touch ,recoat: after 24 hours
- Full cure: 10 days
- Cures by chemical reaction
- Weight: 1,21 kg / 1 liter
- Shelf life: 1 year
- VOC level: 473 grams / liter
- Heat resistance: withstands 205°C
- Do not use as a single-corrosion coat system exposed to the sun. Epoxies will chalk when exposed to UV over time.
- On food preparation surfaces that are in direct contact with foodstuffs.
- Do not apply over chlorinated rubber. Even after sandblasting, the chlorination can attack the solvents and brittle the coating.
