Lining Kote is a two-part epoxy designed to protect against the harshest acid, base, and solvent environments. Lining Kote is extremely tough and durable, yet flexible to provide the best possible protection.
- Ultimate protection against greater than 25% concentrations of acids, bases, and solvents.
- Will withstand high heat temperatures up to 205°C (400°F).
- Applied over damp surfaces with no loss of adhesion.
- Tintable to whatever colour desired, curing with a smooth texture.
- Protection against constant exposure to most, acids, bases, and other corrosive chemicals.
- Specifically designed for interior use. Use for indoor metal surfaces that are exposed to constant water pooling or condensation.
- Flooring protection, as Lining Kote is tough enough to withstand traffic.
- On concrete and steel whey tanks on hog farms to protect tanks from wear.
- Type: amine - cured bisphenal - based epoxy
- Applied rate: cca 2 m2/Liter
- Dry times: 4 hours to touch / minimum 12 hours to recoat
- Full cure: 12 days
- Cures by chemical reaction
- Weight: 1,33 kg /1 liter
- Shelf life: 1 year
- VOC level: 465 grams / liter
- Heat resistance: Vydrží teploty do 205°C
- Can be tinted any colour desired.
- As with any epoxy, Lining Kote will chalk and loose gloss when exposed to UV rays.
- Do not used directly on food preparation surfaces.
- Do not apply over chlorinated rubber. Even after sandblasting, the chlorination can attack the solvents and brittle the coating.
