Get heat protection that surpasses conventional insulation with HSC™ Coating. HSC™ Coating is a ceramic based, water-borne insulating coating designed to insulate in medium temperature situations. Use HSC™ Coating as a base coat/primer or build layers for additional protection.
This insulation method is much different than the traditional “wrap” insulation materials that only slow down the loss of heat (known as an R rating or “heat transfer”). The seven ceramic compounds used create a barrier to catch and hold heat on the surface of the unit—be it pipe, furnace surface, boiler, etc. Unlike wraps that use air as the insulation component, the ceramic compounds in HSC™ Coating resist absorbing heat trying to come off the surface to escape. This traps and holds the heat onto the surface for more effective insulation performance.
- Easy to Apply - Apply directly to hot pipes while operating with brush, roller, or airless sprayer.
- Increased Insulation - Additional coats immediately reduce surface temperature and loss of heat.
- Long Lasting – Does not absorb moisture or lose insulation value.
- Safe - HSC™ Coating is non-flammable and non-toxic.
- Coverage – Can be brushed or sprayed to fit over any configuration or shape.
- Reduction of external temperature of hot surfaces as an aid to worker safety.
- Reduction of heat loss for energy savings.
- Stops condensation.
- Helps to stop CUI (corrosion under insulation) by blocking heat loss.
- Film thickness: 50 mil wet (1.25 mm) as primer
125 - 250 mils dry (3 – 6 mm) with build coats depending on need to control different ranges of heat. Build up to meet need. - Dry times: 10 minutes as primer over hot surface, then increase thickness as needed.
24 hours to set
- Do not use for exterior applications unless top coated with Rust Grip® or Enamo Grip for long term durability.
- Do not use for underwater applications.
- HSC™ Coating is white in color and rough in texture .
- Not recommended as the only fire protection material to be used in residential or industrial construction.
- Do not use as floor coating.
- Not UV protected. For external use overcoat with Super Therm®.
