Enamo Grip is a tough, moisture curing, two-component polyurethane enamel, which produces a uniquely hard and durable coating film. Enamo Grip will demonstrate unsurpassed semi-gloss retention, colour-retention, graffiti-resistance, and chalk resistance, when utilized for exterior coating situations, and will provide outstanding resistance to water and humidity, stains, chemicals, and solvents, as well as tremendous scuff-, mar-, and impact-resistance.
- Self-leveling when applied, gives a glossy, smooth-finished surface appearance.
- Applied as a clear coat, or is tintable to any colour desired.
- Extremely tough, Enamo Grip makes an excellent floor coating.
- Easily applied to steel, aluminum, concrete or wood.
- Exceptional graffiti-resistance.
- Submergible - water resistant
- 20+ year lifespan on roofing under normal conditions.
- Topcoat over Rust Grip® when specific colour is needed, to give a long life to the surface, or to protect against water ponding.
- Applied over Super Therm®; to give the best possible protection for a substrate, or to protect against water ponding.
- Protects against UV, wear, weathering, and moisture penetration.
- Seals against breathing moisture/gases and protect against weathering and acid/solvent contact.
- Anti-graffiti protection for surfaces. Applied and cured, Enamo Grip can resist the permanent damage of vandalism.
- Vehicle and equipment finishes.
- Flooring, especially when combined with anti-slip elements.
- Type: aliphatic polyurethane
- Applied rate: concrete / wood: 4.6 sq.m. / 1 l
cca 6 sq.m. / 1 l (smooth surface)
cca 2.5 - 3.5 sq.m. / 1 l (concrete, wood) - Dry time: 2 hours to touch / 4 hours to handle / 2 hours to recoat.
- Full cure: 4-5 days in warm temps
7-10 days in cool temps - Cures by moisture in the air and heat reactivity
- Shelf life: 1 year
- Weight: 1,18 kg / 1 liter
- VOC level: 476 grams / liter
- Impact resistance: 160 psi front / 100 psi back
- Tinting: coating is transparent, can be tinted.
Listing of chemicals that Enamo Grip is resistant to. Solutions to a maximum 15%:
Acetone, Acetylene, Acropol, Airturbo fuel, Alcohol C12 - C15, Alcohol ethoxylate, Ammonium salt solution, Ethoxysulfate, Alkane, Alkyl benzene, Technical isooctane (saponate - i22-i130), Allyl alcohol, Alpha olefin, Benzyl alcohol, Alpha - namylene, Amyl carbinol, Amylene, Anivax SX 3158, Antifreeze, Asphalt, Aviation technical isooctanes, Aviation kerosene, Benzene, Benzol, Benzyl alcohol, Butyl alcohol, Alkyl salicylate, Cerbon dioxide (gas) 100%, Carbonic acid, Certrex, Citric acid, Coal tar benzene, Cycloheptane, Decyl alcohol, Diesel fuel, Diethylbenzene, Dipropyl ketone, Dodecyl alcohol, Engine oil, Ethoxol, Ethylene glycol methyl ether, Glycol, Heptane, Hexyl alcohol, Isooctane, Isopropyl ether, Kerosene, Methanol, Methylbenzene, Polyurethane glycol, Sodium chlorine, Toulene, Potassium hydroxide, Sodium hydroxide, Sulfuric acid, Nitric acid
- Not intended for use on food preparation surfaces that are in direct contact with foodstuffs.
- Do not apply over wet or moist surfaces. Surfaces must be completely dry.
- Tinting: Can be factory tinted any colour desired with a minimum 1000 liters bought. Can be tinted locally using special 844 series pigments for two - component polyurethans.
